Sheath installation is easy! Install tip of camera into sheath pouch as shown.

Slide camera into sheath until tip of camera is at the end of sheath, then pull off the paper backing and clear facing sheet. Check tip to make sure sheath is flush with tip.

If cleaning under the focus ring is needed, use the provided Allen wrench (.035") and unscrew the focus button's attaching screw as shown here.

Slide the focus ring forward and carefully clean the areas needed with a disinfectant towel being sure not to get debris into the mechanics of the focus system. To reassemble, slide the focus ring back onto the boss and insert screw through the button and re-tighten.

Disposable sheaths always fit perfectly over the ImageMaster's entire body. With a flush-face lens tip and its sleek camera handpiece design, sheaths apply easily to the camera without wrinkles and or any distortion to pictures. Sheath's mid-section design allows freedom of use for focus control and key pad buttons when sheaths are applied.